ACCURATE METERING Sanitary Turbine HM-200S Flow Meter W-389

( Brand: Accurate Metering ), ( Manufacturer Part Number: HM-200 )

Review ACCURATE METERING Systems Sanitary Turbine Flow Meter

The **Horizon Hm-200/Hm-200S Sanitary Turbine Flow Meter (Model W-389)** is a high-performance, hygienic flow measurement solution designed for demanding applications in the food and beverage, pharmaceutical, biotechnology, and dairy industries where precision, reliability, and sanitary compliance are paramount. Engineered with a robust **316L stainless steel** construction, this flow meter adheres to the strictest sanitary standards, including **EHEDG (European Hygienic Engineering & Design Group) and 3-A Sanitary Standards**, ensuring seamless integration into CIP (Clean-In-Place) and SIP (Sterilize-In-Place) systems. Its **welded, seamless design** eliminates crevices and dead zones, preventing bacterial buildup and simplifying maintenance, while the **smooth, polished interior surfaces** further enhance hygienic performance.

The **Hm-200/Hm-200S** operates on a **magnetic induction principle**, utilizing a precision turbine rotor that spins proportionally to the flow rate of the liquid passing through. The **W-389 model** features an **integrated electronic transmitter** with a **pulse or analog output (4-20 mA or 0-20 mA)**, providing real-time flow data for monitoring, logging, or process control applications. Its **wide measurement range (0.5 to 100 m /h or 2.1 to 430 USGPM, depending on pipe size)** makes it versatile for both low-flow and high-flow applications, while the **high accuracy ( 0.5% of reading)** ensures consistent performance across varying operating conditions. The meter s **low-pressure drop design** minimizes energy consumption, making it an efficient choice for systems where minimal head loss is critical.

For enhanced functionality, the **Hm-200S variant** includes a **built-in totalizer**, allowing for cumulative flow measurement and integration with PLCs, SCADA systems, or data acquisition platforms. The **IP65-rated housing** provides robust protection against environmental contaminants, while the **modular design** allows for easy replacement of components, reducing downtime during servicing. Additionally, the meter s **compatibility with a wide range of fluids**, including water, dairy products, juices, beverages, and mild chemicals, is further supported by its **self-lubricating bearings**, which extend operational life and reduce maintenance requirements. Whether deployed in beverage filling lines, pharmaceutical manufacturing, or food processing facilities, the **Horizon Hm-200/Hm-200S (W-389)** delivers uncompromising accuracy, durability, and hygienic integrity, making it an indispensable asset for industries where flow measurement must meet the highest standards of cleanliness and reliability.

### **Pros and Cons of buying a Accurate HM-200/HM-200S Sanitary Turbine Flow Meter (W-389)**

1. **High Accuracy and Precision** The HM-200 series is designed for precise flow measurement, making it suitable for applications requiring reliable data, such as pharmaceutical, food and beverage, and biotech industries.

2. **Sanitary Design** Complies with **3-A Sanitary Standards** and **EHEDG** guidelines, ensuring easy cleaning and compliance with strict hygiene regulations in food, beverage, and pharmaceutical processing.

3. **Wide Flow Range** Capable of measuring a broad range of flow rates, from low to high volumes, depending on the model and impeller size.

4. **Durable Construction** Made from **stainless steel (SS316L)** and other corrosion-resistant materials, ensuring long-term durability in harsh environments.

5. **Easy Installation and Maintenance** Features a **tri-clamp connection** for quick installation and disassembly, reducing downtime for cleaning or replacement.

6. **Digital Output Options** Supports **4-20mA, pulse, or digital communication (HART, Modbus)** for easy integration with PLCs or data logging systems.

7. **Low Pressure Drop** The turbine design minimizes pressure loss, improving efficiency in piping systems.

8. **Temperature and Pressure Compatibility** Suitable for a wide range of temperatures and pressures, depending on the model (typically up to **150 C and 10-20 bar**).

9. **Backward Compatibility** The **W-389** model (a specific variant) may offer additional features like **remote display or enhanced calibration options**, improving usability.

10. **Global Certification** Meets **CE, FDA, and other regulatory standards**, ensuring reliability in international markets.

1. **Higher Initial Cost** Compared to basic mechanical flow meters, the HM-200 series is a premium product, which may be a significant investment for small-scale operations.

2. **Sensitive to Particle Contamination** Turbine meters can be affected by **abrasive particles or debris**, requiring proper filtration upstream to maintain accuracy.

3. **Limited to Clean Fluids** Not ideal for **slurry, viscous, or highly corrosive fluids** without additional modifications.

4. **Calibration Requirements** Like all turbine meters, it requires **periodic recalibration** to ensure accuracy, adding maintenance overhead.

5. **Potential Wear Over Time** The turbine impeller may wear out with prolonged use, especially in abrasive environments, necessitating replacement.

6. **Limited Low-Flow Sensitivity** Some models may struggle with **very low flow rates**, leading to reduced accuracy in certain applications.

7. **Installation Restrictions** Requires **straight pipe runs (typically 10-20 diameters upstream/downstream)** for optimal performance, which may not always be feasible in retrofits.

8. **Power Dependency (for Digital Models)** If using **HART or digital outputs**, a power source is required, which may not be available in all setups.

---

### **Conclusion**

The **Accurate HM-200/HM-200S sanitary turbine flow meter (W-389)** is a **high-quality, precision instrument** ideal for industries where **accuracy, hygiene, and durability** are critical. It excels in **food, beverage, pharmaceutical, and biotech applications** due to its **sanitary design, wide flow range, and digital integration capabilities**. However, its **higher cost, sensitivity to contamination, and maintenance needs** make it less suitable for **budget-conscious or highly abrasive environments**.

If your application requires **reliable, clean fluid measurement with minimal pressure loss and easy cleaning**, this meter is an excellent choice. For **low-budget, high-contamination, or non-sanitary applications**, alternative meters (such as **magnetic, ultrasonic, or positive displacement types**) may be more appropriate.

---

### **Recommendation**

- You need **high-accuracy flow measurement** in a **sanitary environment** (food, pharma, biotech).

- Your system requires **digital output (HART/Modbus)** for integration with control systems.

- You can **install proper filtration upstream** to protect the meter.

- Budget constraints allow for a **premium, long-term investment** in flow measurement.

- You work with **abrasive, viscous, or highly corrosive fluids** without additional protection.

- Your budget is limited, and a **lower-cost meter** (e.g., magnetic or ultrasonic) would suffice.

- Your system has **limited straight pipe runs**, making turbine meter performance unreliable.

- You require **extremely low-flow measurement** where turbine meters may struggle.

**Final Suggestion:** If purchasing, **verify the exact model (W-389) specifications** with the supplier to confirm compatibility with your fluid type, pressure, and temperature conditions. Additionally, **include proper filtration and regular calibration** in your maintenance plan to maximize meter lifespan and accuracy.

Details:

The turbine design ensures precise and reliable readings, making it an essential tool for businesses in the hydraulics, pneumatic, pumps, plumbing industries. The Accurate Metering Systems HM-200S Sanitary Turbine Flow Meter W-389 is a high-quality flow meter designed for industrial use. The Accurate Metering Systems brand is known for its dependable products, making the HM-200S a trusted choice flow control needs. With its Accurate measurements and durable construction, this flow meter is perfect for monitoring controlling the of fluids in various applications.

part #: hm200 price

• $499.99

specifications pneumativalv:

• brand: Accurate Metering
• mpn: Hm-200

offer pneumativalv:

• availability: In Stock
• sold: 0
• started: March 31, 2026
• options: Ship-to-home
• quantity: 1
• best offers: True

seller pneumativalv:

• rating: 99.9%
• # reviews: 1942
• city: Erie, Pennsylvania

shipping pneumativalv:

• class: Standard
• service: USPS Ground Advantage
• carrier: USPS
• transit: 2-6 Days
• cost: $0.00
• type: Fixed

general pneumativalv:

• condition: Used
• Pump Flow Controllers > Flow Controllers Meters > Flow Meters

returns pneumativalv:

• policy: Returns Accepted
• time: 30 Days
• method: Money back
• paid by: Seller

payments pneumativalv:

• credit card: Visa
• wallet: Apple-pay
• other

Accurate Metering HM-200 Is Similar To:

• Izms-80 Accurate Metering System (45.3% similar) ...(January 31st, 2018)
• Accurate Metering Systems Izmsd Flow Meter Controller Diesel Rate 150 Gpm (54.4% similar) Flow rate 150 GM. It comes with a 60 day warranty...(August 19th, 2023)
• Accurate Metering Systems Izms-80d Flow Meter Diessel Rate 300gpm (59% similar) Accurate Metering systems, IZMS-80D, flow meter, diesel, rate 300GPM, the flow meter has previously been in service. It comes with a 60 day warranty...(September 8th, 2024)
• Accurate Metering Systems Izms-50d Flow Meter Diessel Rate 50gpm (58% similar) It comes with a 60 day warranty. Accurate Metering systems, IZMS-50D, flow meter, diesel, rate 50GPM, the flow meter has previously been in service...(September 8th, 2024)