ISCO 4220 Submerged Probe Flowmeter Flow Meter 603224049

( Brand: Isco ), ( Manufacturer Part Number: 4220 ), ( Part Type: Probe ), ( Flow Meter Type: Submerged Probe Flow Meter )

Review ISCO Submerged Probe Flow Meter Flowmeter

The **ISCO 4220 Submerged Probe Flow Meter (Part #603224049)** is a high-performance, industrial-grade instrument designed for precise and reliable flow measurement in challenging environments where traditional above-ground meters are impractical or insufficient. Engineered for submerged applications, this flow meter is specifically built to operate within water bodies, wastewater treatment systems, stormwater runoff channels, or any other liquid-filled conduit where direct immersion is required. Its robust construction ensures durability against abrasive particles, corrosive substances, and extreme pressure variations, making it an ideal choice for demanding municipal, environmental, and industrial monitoring tasks.

At the heart of the ISCO 4220 is a **propeller-based turbine flow sensor**, which provides accurate volumetric flow measurements by detecting the rotational speed of a submerged impeller as it is driven by the flowing liquid. The sensor is housed in a **stainless steel or reinforced polymer probe**, depending on the specific model variant, ensuring resistance to rust, chemical degradation, and mechanical stress. The probe s design allows for easy installation in pipes, flumes, or open channels, with minimal disruption to the flow path, thereby maintaining high accuracy and repeatability over extended periods. The meter s **submersible electronics** are sealed to meet stringent IP68 ratings, guaranteeing protection against water ingress and ensuring reliable operation even in fully saturated conditions.

One of the standout features of the ISCO 4220 is its **versatile connectivity and data output capabilities**. Equipped with **RS-232 or RS-485 communication interfaces**, this flow meter seamlessly integrates with SCADA systems, data loggers, or PC-based software for real-time monitoring and analysis. Users can configure the device to output flow rates in various units (e.g., gallons per minute, cubic meters per hour) and set customizable thresholds for alerts or event-based logging. Additionally, the meter supports **pulse output**, allowing for direct interfacing with totalizers, recorders, or other instrumentation. For applications requiring remote monitoring, the ISCO 4220 can be paired with optional **battery-powered or solar-charged data loggers**, ensuring continuous operation in off-grid locations.

The ISCO 4220 is engineered with **low-maintenance considerations** in mind, featuring a **self-cleaning impeller** that minimizes clogging from debris or sediment buildup. The meter s **zero-flow detection** and **flow reversal monitoring** functions enhance its reliability by alerting operators to abnormal conditions that could affect measurement integrity. Furthermore, the probe s **adjustable mounting brackets** and **quick-connect fittings** simplify installation and removal, reducing downtime for servicing or calibration. With a **wide operating temperature range** (typically -20 C to 60 C / -4 F to 140 F, depending on the model), the ISCO 4220 is well-suited for both cold-climate and tropical environments, ensuring consistent performance across diverse operational conditions.

Whether deployed in **wastewater treatment plants** for process optimization, **stormwater management systems** for flood control, or **environmental monitoring applications** for water quality studies, the ISCO 4220 Submerged Probe Flow Meter delivers **unmatched precision, durability, and ease of use**. Its combination of **industrial-grade construction, flexible communication options, and minimal maintenance requirements** makes it a trusted solution for professionals seeking reliable flow measurement in submerged or challenging liquid environments. Backed by ISCO s reputation for innovation in environmental instrumentation, this flow meter stands as a dependable asset for organizations prioritizing accuracy, longevity, and operational efficiency.

### **Pros and Cons of buying a ISO 4220 Submerged Probe Flow Meter (Model 603224049)**

1. **High Accuracy and Compliance** The ISO 4220 standard ensures precise measurement of liquid flow in submerged applications, making it ideal for industries requiring strict regulatory compliance (e.g., wastewater treatment, chemical processing, or industrial water management).

2. **Durable and Corrosion-Resistant** Designed for submerged use, the probe is likely constructed from materials resistant to corrosion, chemicals, and abrasion, extending its lifespan in harsh environments.

3. **Non-Intrusive Installation** Since it is a submerged probe, it can be installed without disrupting existing pipelines, reducing downtime and installation costs.

4. **Wide Range of Applications** Suitable for measuring flow in tanks, channels, or open channels, making it versatile for various industrial and municipal uses.

5. **Low Maintenance** Being a submerged probe, it avoids wear from mechanical parts in the flow path, reducing maintenance requirements compared to turbine or ultrasonic meters.

6. **Compatibility with Data Logging Systems** Many ISO 4220-compliant meters integrate with SCADA or data acquisition systems for real-time monitoring and reporting.

7. **Cost-Effective for Large-Scale Use** While the initial cost may be moderate, its durability and accuracy can lead to long-term savings by improving process efficiency and reducing measurement errors.

---

1. **Limited to Submerged Applications** Not suitable for measuring flow in pressurized pipes or non-submerged environments, restricting its use to open channels, tanks, or submerged pipelines.

2. **Potential for Clogging or Fouling** If the probe is exposed to debris, sediments, or viscous liquids, it may require frequent cleaning or maintenance to maintain accuracy.

3. **Calibration Sensitivity** Like all flow meters, it may require periodic recalibration to ensure accuracy, especially if environmental conditions (e.g., temperature, viscosity) fluctuate.

4. **Higher Initial Cost Compared to Simpler Meters** While durable, the upfront cost may be higher than basic flow measurement solutions like mechanical meters or open-channel flow sensors.

5. **Installation Complexity** Proper positioning and alignment are critical for accurate readings. Incorrect installation can lead to measurement errors or damage.

6. **Limited Flow Rate Range** Depending on the model, it may not be suitable for extremely high or low flow rates, requiring verification against specific application needs.

7. **Vendor Dependency** Some ISO 4220-compliant meters may require specialized installation or support from the manufacturer, adding potential dependency on the supplier.

---

### **Conclusion**

The **ISO 4220 submerged probe flow meter (603224049)** is a robust and accurate solution for measuring flow in submerged or open-channel applications where compliance and reliability are critical. Its durability, non-intrusive design, and resistance to corrosion make it well-suited for industrial, wastewater, or chemical processing environments. However, its limitations such as restricted use to submerged applications, potential fouling issues, and higher initial cost must be carefully considered.

If your application involves **open channels, tanks, or submerged pipelines** where **high accuracy and compliance with ISO 4220 are required**, this meter is a strong recommendation. However, if you need **pressurized pipe measurements, extreme flow rates, or a simpler, lower-cost solution**, alternative technologies (e.g., ultrasonic, turbine, or magnetic flow meters) may be more appropriate.

- **Buy if:** You need an accurate, durable submerged flow meter for compliance-driven applications (e.g., wastewater treatment, industrial water management) and can justify the initial cost.

- **Avoid if:** Your application involves pressurized pipes, high debris loads, or requires a lower-cost, simpler solution.

- **Consider alternatives if:** You need flexibility across different flow environments or require a meter with a broader flow range.

Before purchasing, verify the meter s specifications against your exact flow conditions, consult the manufacturer for installation guidelines, and ensure compatibility with your existing monitoring systems.

Details:

For more details, please refer the photos included with listing. Signs of wear, including scuffs and scratches may be visible on the units body. Only the parts/accessories shown in photos are included listing. ISCO 4220 Submerged Probe Flow Meter 603224049 Flowmeter, Pulled from a used retired equipment, Flowmeter.

The manual is for a ISCO 4230 model. The power supply is not included no other parts/accessories.

part #: 4220 prices

• $239.99-$349.98

specifications pneumativalv:

• brand: Isco
• mpn: 4220
• part type: Probe
• flow meter type: Submerged Probe Flow Meter

payments pneumativalv:

• credit card: DIscover
• other
• wallet: Google-pay

seller pneumativalv:

• city: Glendale, Arizona
• rating: 100.0%
• # reviews: 1676

offer pneumativalv:

• started: February 9, 2026
• sold: 0
• availability: In Stock
• options: Ship-to-home
• quantity: 1

general pneumativalv:

• condition: Used
• Pump Flow Controllers > Flow Controllers Meters > Flow Meters

returns pneumativalv:

• time: 30 Days
• policy: Returns Accepted
• method: Money back
• paid by: Seller

shipping pneumativalv:

• service: FedEx Ground / FedEx Home Delivery, USPS Ground Advantage, UPS Ground
• carrier: FedEx, USPS, UPS
• cost: $37.36
• transit: 3-9 Days
• class: Standard
• type: Calculated

Isco 4220 Is Similar To:

• Isco 60-3224-001 3220 Submerged Probe Flow Meter 12v-dc (68.5% similar) Solenoid coils. Safety and security. Rotary lobe blowers. Flow indicators. Solenoid valves. Shock absorbs...(October 18th, 2024)