BLANCETT 111-120 Turbine Fnpt Clean Flow Meter

( Brand: Blancett ), ( Manufacturer Part Number: 111-120 ), ( Flow Meter Type: Turbine Flow Meter ), ( Port Diameter: 2 In ), ( Country Of Origin: United States )

Review BLANCETT Turbine Flow Meter Inch Fnpt To No pickup Clean used

The **Blancett Model 111-120 Turbine Flow Meter (FNP Turbine, FNPT 10, No-Pickup, Clean-Used)** is a precision-engineered, industrial-grade flow measurement device designed for reliable and accurate fluid flow monitoring in a variety of applications, including natural gas, air, steam, and other clean, non-corrosive gases. Part of Blancett s renowned **FNP Turbine Series**, this unit operates on the principle of rotational energy transfer, where the fluid s kinetic energy spins a precisely balanced turbine rotor within a calibrated housing. The rotor s speed is directly proportional to the volumetric flow rate, allowing for real-time, high-precision measurements with minimal pressure drop. This particular model, identified as **FNPT 10**, features a **10-inch (250 mm) nominal pipe size**, making it suitable for medium to large-scale flow applications where consistent and repeatable data is critical such as in utility metering, process control, or research environments.

The **no-pickup designation** indicates that this turbine flow meter has been carefully inspected and cleaned to remove any residual contaminants, scale, or internal deposits that could otherwise affect accuracy or performance. While it is a **clean-used unit**, it retains Blancett s high-quality construction, including a **stainless steel or alloy rotor assembly** (depending on original specifications) and a **sealed, corrosion-resistant housing** designed to withstand operational pressures and temperatures typical of industrial settings. The meter s internal bearings and seals have been serviced to ensure smooth operation, though it is important to note that this is not a new, factory-sealed unit it has been previously installed and is now being offered as a refurbished alternative to new equipment, providing cost-effective performance for applications where budget constraints do not compromise on Blancett s reputation for durability and accuracy.

Mechanically, the **111-120 series** incorporates a **pulse output signal** (typically via a magnetic pickup or electronic transmitter, though the "no-pickup" designation suggests the original sensor may have been removed or is non-functional), which can be interfaced with digital indicators, totalizers, or SCADA systems for continuous monitoring. The turbine s **low-turbulence flow path** minimizes pressure loss while maintaining high repeatability, often within ** 0.5% of reading accuracy** under ideal conditions, though actual performance may vary slightly depending on the unit s original calibration and maintenance history. The meter s **flanged connections** (likely ANSI Class 150 or 300, depending on the original configuration) ensure secure and leak-free installation, while the **clean-used condition** implies that the housing and internal components have been thoroughly inspected for wear, with any necessary replacements (such as O-rings or gaskets) performed to restore functionality.

Ideal for applications requiring **high-volume, clean-gas flow measurement**, this Blancett turbine flow meter is particularly well-suited for **natural gas distribution, compressed air systems, or steam applications** where precise metering is essential for billing, process optimization, or safety compliance. Its robust design and Blancett s legacy of engineering excellence make it a trusted choice for industries prioritizing reliability without the premium cost of a new unit. However, potential buyers should conduct a thorough inspection or request additional documentation (such as calibration certificates or maintenance logs) to verify the meter s condition and ensure it meets their specific operational requirements before installation. Proper recalibration and periodic servicing will be necessary to maintain optimal performance, but for those seeking a **cost-effective, high-performance alternative to new equipment**, the **Blancett 111-120 FNPT 10 No-Pickup Clean-Used Turbine Flow Meter** offers a compelling balance of quality and affordability.

**Pros and Cons of Buying a Blancett 111-120 Turbine Flow Meter (FNP-T10, No-Pickup, Clean-Used)**

1. **Cost-Effective Alternative** A clean-used unit is significantly cheaper than a new one, making it a budget-friendly option for applications where budget constraints are a concern.

2. **Functional and Reliable** Blancett turbine flow meters are known for their durability and accuracy, especially in clean gas or liquid applications. A well-maintained used unit can perform comparably to new equipment.

3. **Quick Availability** Purchasing used equipment often means faster delivery than waiting for a new unit, which can be critical for time-sensitive projects.

4. **Proven Performance** The FNP-T10 model is designed for low-pressure drop and high turndown ratios, making it suitable for precise flow measurement in industrial, HVAC, or laboratory settings.

5. **Compatibility with Existing Systems** Since it is a standard Blancett model, it should integrate well with existing piping and instrumentation systems that use similar flow meters.

6. **Lower Maintenance Costs (if in Good Condition)** If the unit has been properly cleaned and inspected, it may require less initial maintenance than a new unit that needs calibration or initial setup.

1. **Unknown Service History** Without full documentation, it s impossible to verify the exact usage, maintenance records, or potential wear and tear. Hidden issues (e.g., internal damage, worn bearings, or calibration drift) could lead to premature failure.

2. **Potential Calibration Drift** Used flow meters may not be factory-calibrated, requiring additional time and cost for recalibration before use.

3. **Limited Warranty or No Warranty** Most used equipment comes with no warranty, meaning you bear all risks of failure or performance issues post-purchase.

4. **Higher Risk of Contamination** Even if labeled "clean," there s a chance residual contaminants (e.g., debris, lubricants, or corrosion) could affect performance, especially in sensitive applications.

5. **Resale Value Concerns** If the unit fails or needs replacement sooner than expected, selling a used Blancett may be difficult compared to a new one.

6. **Compatibility with Specific Fluids** The FNP-T10 is typically rated for clean gases or liquids, but if the application involves abrasive, corrosive, or viscous fluids, the used unit may not be suitable without additional checks.

7. **Potential for Counterfeit or Misrepresented Condition** There is a risk of purchasing a unit that has been misrepresented (e.g., labeled "clean" but actually requiring major repairs).

Buying a clean-used Blancett 111-120 turbine flow meter (FNP-T10, no-pickup) can be a financially prudent choice if you prioritize cost savings and the unit meets your application s requirements. However, the lack of warranty, uncertainty about its condition, and potential need for recalibration introduce risks that must be carefully weighed. For critical or high-stakes applications where reliability and traceability are paramount, investing in a new or certified pre-owned unit with full documentation may be the safer option.

- You have verified the unit s cleanliness and functionality through a thorough inspection (preferably by a trusted third party).

- The application is non-critical (e.g., secondary flow measurement, lab use, or low-pressure gas service).

- You are prepared to recalibrate and test the meter before full deployment.

- The seller provides documentation or a warranty (even limited) to mitigate risks.

- The application involves high-value fluids, corrosive media, or strict regulatory compliance (e.g., pharmaceutical, food processing).

- You lack the expertise to assess the meter s internal condition or perform recalibration.

- The seller cannot provide a clear history of maintenance or usage.

- The price seems unusually low, raising suspicions of hidden defects.

- A **detailed inspection report** (visual and functional).

- **Recalibration services** before transfer.

- A **limited warranty or return policy**.

If budget allows, a new Blancett flow meter or a certified refurbished unit with full documentation would eliminate uncertainty.

Details:

SECTION 2023 R4-I 9 OOO MD. We greatly appreciate your patronage of our small American business. BLANCETT, 111-120, TURBINE FLOW METER, 2 FNPT, 10 END to END, NO-PICKUP, CLEAN - USED. Mistakes, however, do happen and items sometimes get damaged during transit.

part #: 111120 prices

• $588.00-$1358.99

specifications pneumativalv:

• brand: Blancett
• mpn: 111-120
• flow meter type: Turbine Flow Meter
• port diameter: 2 In
• country of origin: United States

general pneumativalv:

• Pump Flow Controllers > Flow Controllers Meters > Flow Meters
• condition: Used

shipping pneumativalv:

• carrier: UPS
• class: Standard, One-day
• service: UPS Ground, UPS Next Day Air
• type: Calculated
• cost: $53.70
• transit: 3-8 Days

seller pneumativalv:

• # reviews: 1379
• city: Broussard, Louisiana
• rating: 99.9%

offer pneumativalv:

• availability: In Stock
• options: Ship-to-home
• sold: 0
• best offers: True
• quantity: 1
• started: February 11, 2026

payments pneumativalv:

• wallet: Apple-pay
• other
• credit card: Diners-club

returns pneumativalv:

• method: Money back
• policy: Returns Accepted
• paid by: Seller
• time: 30 Days

Blancett 111-120 Is Similar To:

• 111-110 Blancett Turbine Flow Meter Inch Model (57.4% similar) Originally developed for the secondary oil recovery market, model 1100 flow meter is an ideal liquid measurement on or off field. This makes it ideal for applications such as pipelines, production injection fields, in-situ mining operations, offshore facilities, and other industrial. The model 1100 ...(April 25th, 2018)
• B110-750 Blancett Flowmeter Turbine 15 (33.3% similar) Flow meter, turbine, GM max. Housing material 316 stainless steel, fitting 1/2 in fnpt, chamber shaft tungsten carbide, flow range to 15 GM, accuracy water and low viscosity fluids, pressure drop 12 psi, max. Brand new: Blancett B110-750 FLOWMETER,TURBINEGPM,15GPM,1 in : B110-750MSRP: 615. Viscosity...(January 11th, 2018)
• Blancett B111-121 Flowmeter Turbine 180 Gpm 2 In Mnpt (52.7% similar) Output 4-20MA. See the pictures for more details. Blancett flow meter - which includes the turbine, magnetic pickup, and intelligent frequency converter. Specifications: model 111-121, flow 15-180 GM max pressure 5000 psi. Although it was originally purchased for a project, has never been used...(November 26th, 2023)
• Blancett 12279913 B2200 Series Flow Monitor With 1.5 Inch Turbine Meter (36.7% similar) Blancett B2200 series flow monitor with 1.5 turbine meter SN-12279913, B111-115 flow meter,turb INE,180 GPM,1-1/2 in fnpt 6NZT7 max WP 5000 psi 34.5 mp...(December 2nd, 2024)
• Blancett 1269701 Water Flowmeter Model 200p Maz 1000 Psi 1.5 Inch (42.6% similar) Part #: Blancett 1269701 for sale...(December 3rd, 2024)
• Blancett B110-500 Flow Meter Turbine Untested (50.4% similar) Appears to be 1'' pipe thread. Has good threads...(April 27th, 2026)